CanadianSolar CSI Series Installation And Operation Manual page 27

PROJECT NAME
LOCATION
INSTALLATION AND
COMMISSIONING CHECKLIST
System Owner:
Address / Location:
Inverter model:
Number of inverters:
Output power*:
Grid: V Max: V Min:
Configuration: MPPT Individual
Monitoring: RS485:
PV module manufacturer:
DC cable size:
Number of series connected modules in PV strings:
Number of PV strings in parallel per MPPT:
Total System size (DC Watts):
GENERAL COMMENTS / OBSERVATIONS:
www.canadiansolar.com
.50.
NUMBER
Inverter mounting tilt:
Input DC voltage:
Frequency Max: Min:
MPPT Parallel
Ethernet:
PV model:
AC cable size:
3 PHASE STRING INVERTERS
(KTL SERIES)
Warning: This checklist is not a replacement for the user manual.
Please read the user manual prior to inverter site selection and installation.
Note site typical arrangements and variances
Inverter firmware revision: DSP:
Insulation limit (K):
Reactive compensation:
Monitoring equipment and supplier:
Transformer ratings, supplier:
*Specify de-rated power and add nameplate power in parenthesis
Please return completed form to inverter.register@canadiansolar.com
LCD:
PV start-up voltage:
+/- PF
.51.