ADC ML-75 Parts Manual page 29

Hot Surface Ignition (HSI) Burner Assembly
Illus. No. Part No.
2 323013
318041
3 150309
4 810029
5 881797
6 141105
7 150103
8 153000
9 151001
10** 140820
140805
11 141210
12 318700
13 150300
14 128927
880960
140411
15 881367
16 142809
17 323737
18 319704
19 151000
20 150001
21 130401
22 ---------
23 143000
142936
24 150309
25 150309
26 151001
27 150309
28 128921
29 150301
30 881597
31 150309
* Burner orifices are not included and must be ordered separately.
** Consult factory for elevations over 2,000 feet.
Telephone: (508) 678-9000
Qty. Description
1 Burner Box Shield/Front ONLY
(for models mfd. as of October 5, 1998)
1 Burner Box Front ONLY
(for models mfd. prior to October 5, 1998)
5 #10-16 x 1/2" Hex Head TEK Crimptite Screw
1 Hot Surface Ignition (HSI) Module Mounting Bracket
1 Hot Surface Ignition (HSI) Module II
4 Large Burner Tube
4 #8-32 x 3/4" Phillips Round Head Machine Screw
4 #8 Steel Burr
4 #8-32 Pal Nut
4 #29 Burner Orifice (natural gas) ONLY
4 #47 Burner Orifice (liquid propane [L.P.] gas) ONLY
1 4-Port Manifold
2 Pipe Bracket (bent)
2 #10-16 x 1/2" Hex Washer TEK PLTD
1 1/2" 24 VAC Redundant (natural gas) Gas Valve
1 1/2" 24 VAC Liquid Propane (L.P.) Gas Valve Assembly
1 24 VAC Gas Valve Liquid Propane (L.P.) Conversion Kit
1 1/2' Union Shutoff with Tail Piece
1 1/2" x 29-1/8" Nipple
1 Pipe Bracket
1 Hi-Limit Mounting Bracket
2 #6-32 Pal Nut
2 #6-32 x 1/2" Phillips Round Head Machine Screw
1 330º Hi-Limit ONLY
1 Sail Switch
(refer to Sail Switch Assembly on page 38)
1 3/4" to 1/2" Reducing Coupling
1 3/4" BSPT x 1/2" N.P.T. Coupling (CE Only)
2 #10-16 x 1/2" Hex Head TEK Crimptite Screw
2 #10-16 x 1/2" Hex Head TEK Crimptite Screw
2 #8-32 Pal Nut
3 #10-16 x 1/2" Hex Head TEK Crimptite Screw
1 Hot Surface Ignition (HSI) Flame Sensor
1 #8-18 x 7/16" Phillips Pan Head TEK Screw
1 Hot Surface Ignitor (2-1/2" length) - 24 VAC
1 #10-16 x 1/2" Hex Head TEK Crimptite Screw
27
Fax: (508) 678-9447