ADC ML-75 Parts Manual page 19

Tumbler Bearing Assembly
Illus. No. Part No.
11 150501
12 153002
13 153001
14 150621
15 152004
16 801107
801101
801103
801105
17 801104
18 880202
880779
19 152004
20 150610
21 101100
101118
22 101119
23 154301
24 100713
100735
25 100106
26 824807
* As required.
Telephone: (508) 678-9000
(continued)
Qty. Description
4 5/16-18 x 3/4" Hex Head Machine Bolt
4 5/16" Lock Washer
4 5/16" Flat Washer
2 5/16-18 x 1-1/2" Hex Head Machine Bolt
2 5/16-18 Hex Nut
1 1-3/8" Bearing Box Magnetic Sensor Assembly Complete
(includes illus. nos. 4 through 20)
For Models Mfd. without Rotational Sensor
(for models mfd. as of April 12, 1999)
1 1-3/8" Bearing Box Assembly Complete
(includes illus. nos. 4 through 20)
For Models Mfd. without Rotational Sensor
(for models mfd. prior to April 12, 1999)
1 1-3/8" Bearing Box and Support ONLY
(includes illus. nos. 4, 5, 6, 16, and 17)
1 1-3/8" Bearing Box ONLY
1 Pillow Block Bearing Support ONLY
1 1-3/8" Pillow Block Bearing with Nylock Setscrew
1 1-3/8" Pillow Block Bearing Assembly with Magnet
(for models mfd. with optional rotational sensor)
2 5/16-18 Hex Nut
2 5/16-18 x 1-1/2" Allen Setscrew
1 18" Pulley
(for non-reversing models Only)
1 18-3/4" Pulley
(for reversing models Only)
1 1-3/8" Taper Lock Hub (key not included)
For Reversing Models ONLY
2 5/16-18 x 5/16" Allen Setscrew
(for non-reversing models Only)
1 1/4" x 1/4" x 7/8" Key
(for non-reversing models Only)
1 Shaft Key (for taper lock hub)
For Reversing Models ONLY
1 5L-690 V-Belt (basket [tumbler] to idler)
1 Rotational Sensor Assembly
(for models mfd. with optional rotational sensor)
17
Fax: (508) 678-9447