Features - Siemens 7XV5662-0AA00 Directions For Use Manual

English

Features

The communication converter has the following characteristics:
Transmission speed for X.21 selectable between 64, 128, 256 and 512 kBit/s.
Transmission speed for G.703.1 64 kBit/s.
Connection to the protection device via fibre optic cable to a FO5 module integrated
there.
Maximum fibre optic cable length for the connection between protection device ↔
communication converter 1.5 km (1 mile) with 62.5/125 µm multi-mode fibres. Connec-
tion with ST-connector.
Data connection to the communication between device via DSUB–connector (X.21, 15-
pole) or
5-pole screw terminal (G.703).
Maximum line length for the connection between communication device ↔ communica-
tion converter for X.21 100 m (300 ft).
Maximum line length for the connection between communication device ↔ communica-
tion converter for G.703.1 300 m (900 ft).
Power supply unit with extended range for direct voltage 24 VDC to 250 VDC (limit
voltage 19 VDC to 300 VDC) and alternating voltage 115 VAC to 250 VAC (range
92 VAC to 286 VAC).
Monitoring the auxiliary voltage, the clock signal of the communication network and the
internal logic.
Rigid aluminium die-cast case (up version /EE) resp. rigid steel-plate housing (from
version /FF) with the dimensions 188 mm × 120 mm × 56 mm (W × D × H) for DIN rail
mounting.
Signalling the operating states via LED.
Power consumption < 3.5 VA.
34
7XV5662-0AA00
C53000-B1174-C134-7