Taylor C300 Operator's Manual page 24

USER INTERFACE
DEFROST TIME RIGHT
CYCLE 1
<- - - ->
Press the MENU (SEL) key to return to the operator
menu.
Screen F—CURRENT CONDITIONS
This screen displays the current viscosity, product
temperature, and pressure for each freezing cylinder. An
asterisk will indicate which side is refrigerating. Press the
MENU (SEL) key to return to the operator menu.
Note: Viscosity is checked only when product
temperature is below 40°F (4.4°C).
CURRENT CONDITIONS
L*1200Hd
R*1200Hd
Screen G—FAULT HISTORY
5
This option provides a record of the last 20 faults. The
display also indicates the date and time each fault
occurs.
F A U L T H S I T O R Y
1 0 2 / 5 0 / 6
NO FAULT FOUND
<- - - -> + + + - - -
Press the AUTO (- ->) and OFF (<- -) keys to increase or
decrease the fault page.
Page numbers are located in the upper right-hand corner
of the display. The most recently recorded fault will
appear on page 1. The fault description is listed on the
third line of the fault page.
F A U L T H S I T O R Y
10/25/06
R S Y R U P P R E S S L
<- - - -> + + + - - -
5-6
SUN
+ + + - - - SEL
27.3F
27.3F
SEL
O W
SEL
Press the AUTO (- ->) key to move to the next screen.
The next screen will indicate when the fault was satisfied.
10:00
F A U L T H S I
1 0 2 / 5 0 / 6
RESTORED FROM FAULT
PAGE 2
Press the MENU (SEL) key to return to the operator
menu.
Screen H—RINSE/SANITIZE
This screen allows the operator to rinse or sanitize the
freezing cylinder(s).
RINSE
< - - - > -
SEL
Use the AUTO (- ->) and OFF (<- -) keys to select either
RINSE or SANITIZE, and then press the MENU (SEL)
key.
LEFT SIDE
< - - - > -
1
0 8 3 : 4
Use the cursor keys to select YES or NO, then press the
MENU (SEL) key.
RIGHT SIDE
< - - - > -
Repeat for the right side of the unit.
2
0 8 3 : 3
Model C300
T O R Y
+ + + - - -
RINSE / SANITIZE
SANITIZE
SANITIZE
YES
S E L
SANITIZE
YES
S E L
2
1 4 0 : 6 1 : 9
SEL
EXIT
- - -
S E L
NO
- - -
NO
- - -
User Interface