Table of Contents
Advertisement
Notices
© Agilent Technologies, Inc.
No part of this manual may be reproduced in
any form or by any means (including
electronic storage and retrieval or
translation into a foreign language) without
prior agreement and written consent from
Agilent Technologies, Inc. as governed by
United States and international copyright
laws.
Manual Part Number
U5309-90001
Edition
Wednesday, June 11, 2014
Sales and Technical Support
To contact Agilent for sales and technical
support, refer to the "support" links on the
following Agilent web resources:
http://www.agilent.com/find/embed
n
ded
www.agilent.com/find/assist
n
(worldwide contact information for
repair and service)
Information on preventing damage to your
Agilent equipment can be found at
www.agilent.com/find/tips.
Regulatory Compliance
This product has been designed and tested
in accordance with accepted industry
standards, and has been supplied in a safe
condition. To review the Declaration of
Conformity, go to
http://regulations.corporate.agilent.com
/DoC/search.htm.
Warranty
The material contained in this document is
provided "as is," and is subject to being
changed, without notice, in future editions.
Further, to the maximum extent permitted by
applicable law, Agilent disclaims all
warranties, either express or implied, with
regard to this manual and any information
contained herein, including but not limited to
the implied warranties of merchantability
and fitness for a particular purpose. Agilent
shall not be liable for errors or for incidental
or consequential damages in connection with
the furnishing, use, or performance of this
document or of any information
contained herein. Should Agilent and the
user have a separate written agreement with
warranty terms covering the material in this
document that conflict with these terms, the
warranty terms in the separate agreement
shall control.
Technology Licenses
The hardware and/or software described in
this document are furnished under a license
and may be used or copied only in
accordance with the terms of such license.
Restricted Rights Legend
If software is for use in the performance of a
U.S. Government prime contract or
subcontract, Software is delivered and
licensed as "Commercial computer software"
as defined in DFAR 252.227-7014 (June
1995), or as a "commercial item" as defined
in FAR 2.101(a) or as "Restricted computer
software" as defined in FAR 52.227-19 (June
1987) or any equivalent agency regulation or
contract clause. Use, duplication or
disclosure of Software is subject to Agilent
Technologies' standard commercial license
terms, and non-DOD Departments and
Agencies of the U.S. Government will receive
no greater than Restricted Rights as defined
in FAR 52.227-19(c)(1-2) (June 1987). U.S.
Government users will receive no greater
than Limited Rights as defined in FAR
52.227-14 (June 1987) or DFAR 252.227-
7015 (b)(2) (November 1995), as applicable
in any technical data.
Safety Notices
The following safety precautions should be
observed before using this product and any
associated instrumentation.
This product is intended for use by qualified
personnel who recognize shock hazards and
are familiar with the safety precautions
required to avoid possible injury. Read and
follow all installation, operation, and
maintenance information carefully before
using the product.
If this product is not used as specified, the
protection provided by the equipment could
be impaired. This product must be used in a
normal condition (in which all means for
protection are intact) only.
The types of product users are:
Responsible body is the individual or
n
group responsible for the use and
maintenance of equipment, for ensur-
ing that the equipment is operated
within its specifications and oper-
ating limits, and for ensuring oper-
ators are adequately trained.
Operators use the product for its
n
intended function. They must be
trained in electrical safety pro-
cedures and proper use of the instru-
ment. They must be protected from
electric shock and contact with haz-
ardous live circuits.
Maintenance personnel perform
n
routine procedures on the product to
keep it operating properly (for
example, setting the line voltage or
replacing consumable materials).
Maintenance procedures are
described in the user documentation.
The procedures explicitly state if the
operator may perform them. Other-
wise, they should be performed only
by service personnel.
Service personnel are trained to
n
work on live circuits, perform safe
installations, and repair products.
Only properly trained service per-
sonnel may perform installation and
service procedures.
Agilent products are designed for use with
electrical signals that are rated
Measurement Category I and Measurement
Category II, as described in the International
Electrotechnical Commission (IEC) Standard
IEC 60664. Most measurement, control, and
data I/O signals are Measurement Category
I and must not be directly connected to
mains voltage or to voltage sources with
high transient over-voltages. Measurement
Category II connections require protection
for high transient over-voltages often
Advertisement
Table of Contents
