Control Unit - Volvo ECR 58 Translation Of The Original Instructions

IMPORTANT
!
appearance but the content differs. They are not
interchangeable.
LED INDICATIONS
OK
FIXED
LIGHT
Light
CCU
WARNING!
!
sounds without activating the quick coupler locking
function switch. The display shows information
about the current problem.
© Rototilt Group AB
- The control units have a similar
Power
CAN-bus
Internal
Error
A problem has occurred if the buzzer
!

Control unit

The control units have three LEDs:
green, orange and red. When the system
is working correctly, all LEDs light and
with no flashing.
Error
When a malfunction occurs the relevant
LED begins flashing.
PULSATING
PWR (green) shows whether the unit is
LIGHT
powered up.
CAN (orange) shows whether communi-
cations with CAN bus are working.
SYS (red) shows whether the unit's inter-
nal components are working correctly.
The control units are not interchangeable.
Cab control unit, CCU
The control unit receives signals from the
handles and switches.
The control unit sends signals to the
valve block shunt and tiltrotator via CAN
bus.
Rototilt
®
The control unit receives signals from
the cab control unit, and from sensors in
Rototilt®.
Rototilt® control unit sends signals to
valves and LED lamp.
TCU
There is a sensor in the Rototilt® control
unit that detects the tilt angle.
Display
Settings, calibration and activation of
certain functions are made via the display
and its keys.
There is a buzzer in the display that
Sound
sounds to attract the operator's attention
if the quick coupler locking function is
open or in the event of a fault.
Switch, quick coupler locking
function
The quick coupler locking function switch
is interlocked. This prevents accidental
activation of the quick coupler locking
function.
2200397_ EN
control unit, TCU
_6909 2018-03-16 English