Receiver Settings - ORQA FPV.ONE User Manual

RECEIVER SETTINGS

In this menu, you can select the receiver module that you have installed into the
main receiver module bay.
In order to control the different receiver modules directly from the goggles, it is
important to select the receiver module that you are using.
Also, by selecting the correct module the goggle's OSD and module's OSD will
work together without conflicting with each other.
For example, if RapidFire is selected, you will be able to change the channel by
short pressing the CHANNEL UP or CHANNEL DOWN buttons on the
goggles.
A long press on the CHANNEL UP or CHANNEL DOWN buttons changes
the band on the receiver module.
Additionally, by entering the channel table in the menu you can select the desired
frequency of the RapidFire receiver module.
Please note that RapidFire firmware must be updated to at least version 1.3. to
have the full functionallity with the Orqa goggles.
9
Orqa FPV.ONE User Manual, Rev.1.2
©2019. Orqa Ltd.