Image Settings - ORQA FPV.ONE User Manual

IMAGE SETTINGS

IMAGE SETTINGS are used to adjust Contrast, Brightness, Color, Aspect Ratio
and Supersize.
You can access the image settings via the user menu to fine-tune the image.
When adjusting Contrast, Brightness, and Color, the OSD will disappear and the
progress bar will pop-up. Where you can change the setting between 0 and 100
by moving the left-hand joystick
In order to just make some quick changes to the basic image you can move the
left- hand joystick :
1. up and down to adjust the brightness
2. left and right to adjust the contrast
In order to make quick adjustments to the color move the right-hand joystick
left and right.
With the ASPECT RATIO setting you can choose between the 16:9 and 4:3
image ratio. Adjust this setting to best fit your image source.
SUPER SIZE, due to large FOV some of the users can experience pincushion
distortion on the edges of the image. To counter that, the system crops some
pixels in the corners of the screen. The SUPER SIZE setting is for users, who
want to use 100% of the screen.
The RESET setting is used to reset all the parameters of the image to their
factory-set values.
left andright.
11
Orqa FPV.ONE User Manual, Rev.1.2
©2019. Orqa Ltd.