Stand By - ORQA FPV.ONE User Manual

STAND BY

The goggles feature the "Stand-By" option which helps to save the battery.
When the Stand-By mode is activated the goggles will go into the stand-by when
they are taken off the head.
In order to have the Stand-by mode function properly make sure that the stand-by
sensor is not obstructed by the face pad foam.
To activate the Stand-by mode set it to On. The goggles will enter the stand-by
after the set delay time has passed.
The default delay time setting is 20 seconds, and it can be adjusted in steps of 10
seconds to a maximum of 240 seconds.
Once the goggles are put back on, they will automatically turn back on.
Please note that the Stand-by function will turn off only the microdisplays and the
receiver installed in the main receiver bay. The rest of the system will stay
powered on.
12
Orqa FPV.ONE User Manual, Rev.1.2
©2019. Orqa Ltd.