Input Source - ORQA FPV.ONE User Manual

INPUT SOURCE

INPUT SOURCE is used to set the goggles video input source.
You can select between: Receiver, HDMI, AV in and AUTOMATIC.
AUTOMATIC setting will bring up the image from the input you feed to the
goggles.
When automatic mode is on, the default setting is Receiver, but as soon as you
plug in another source it will automatically switch to that input.
If an HDMI source with an unsupported signal is connected, the "Unsupported
HDMI Input" message will appear on-screen.
Automatic setting priority
1. HDMI
2. AV in
3. RX
Please note that the splash screen
with the Orqa logo will be displayed if
there is no valid input signal present.
10
Orqa FPV.ONE User Manual, Rev.1.2
©2019. Orqa Ltd.