Features - ORQA FPV.ONE User Manual

FEATURES

FPV.ONE goggles are equipped with various features and settings for a better
overall user experience.
▪
The HEAD TRACKER feature uses goggles' integrated IMU to track the
movement of the pilots' head. This feature requires the IMU to be reset
every time this feature is used. This is achieved by scrolling to the "SET
ZERO POINT" and by depressing the left-hand joystick
If the camera on the aircraft starts to drift (IMU was not calibrated), press
the "SET ZERO POINT" again.
▪
The HEAD TILT ALARM is used to help the pilots aim the directional
antenna. Especially long-range pilots need to keep the antenna pointed
exactly in the direction of their aircraft to achieve greater distances. This
feature is also helpful for the pilots who tends to drop their head while
flying.
To set this feature change the setting in the menu to ON. The angle is set
both up and down from set zero point. The angle value can be set
between 15° and 45°. If the pilot's head tilts up or down more than the set
angle the beeping sound will be heard.
▪
The POWER BUTTON MODES setting is used to set the desired way
you turn on/off your goggles.
There are 3 power-on modes:
▪
Mode 1: SINGLE PRESS
▪
Mode 2: ONE SHORT - ONE LONG press
▪
Mode ALWAYS ON
In the ALWAYS ON mode goggles are powered ON/OFF by plugging or
unplugging the power source (battery) to the goggles.
▪
The sound feedback can be switched on or off with the BUTTON
SOUND.
13
Orqa FPV.ONE User Manual, Rev.1.2
©2019. Orqa Ltd.
.