ORQA FPV.ONE User Manual page 17

DVR
When recording, the DVR saves data onto the inserted micro SD card.
Eventually, all the available memory space will be used and there will be no free
space for the DVR to store the data. When there is no more available space on
the micro SD card, the DVR will stop recording.
In order to prevent the DVR from stopping the recording because of unavailable
storage space, the "Auto Delete" option can be used. This option allows the DVR
to delete the oldest recorded file on the inserted micro SD Card in order to free
some space for the current recording.
Please note that the "Auto Delete" function will delete only the files created by the
Orqa DVR system. All other files that might be present on the micro SD card will
not be deleted.
When the "Auto Delete" option is turned OFF, the DVR will record untill all the
available space on the micro SD card is used.
When the available memory space on the micro SD card drops to 30 minutes, the
remaining time available will be displayed next to the REC symbol in the top right
corner of the screen .
If there is no available memory space on the micro SD card, and you press the
"DVR Quick Record" button , the "SD card full" message will appear on-screen.
Please note that the DVR saves data in 5-minute-long video files. That means
that recording that is longer than 5 minutes will be saved in multiple files. This is
to make sure that not a complete recording is lost in case of any problems with
data storage or power loss during recording.
If during recording the battery level drops to 6.55V, the REC BAT! will blink in the
top right corner. If the battery level is below 6.55V, the DVR will not start the new
recording and the "Battery critical" message will appear on-screen.
17
Orqa FPV.ONE User Manual, Rev.1.2
©2019. Orqa Ltd.