Intermittent Ventilation; Automatic Operation; Saturation Notification; Ventilation Molding - Gaggenau VL 200 120 Use And Care Manual

en-us
Operating the appliance

Intermittent ventilation

With intermittent ventilation, the fan automatically
switches to fan setting 1 for six minutes every hour.
Switching on
Push in the control knob and turn it clockwise to the
μ position.
Intermittent ventilation is activated. The illuminated ring
behind the control knob lights up orange while the
ventilation system is switched on.
Switching off
Turn the control knob anti-clockwise to position 0.

Automatic operation

In automatic mode, a sensor in the appliance detects the
intensity of the cooking and roasting fumes. The
appliance selects the appropriate fan setting
automatically.
Switching on
Push in the control knob and turn it clockwise to the <
position.
Automatic mode is activated.
The optimum fan setting 1, 2 or 3 is set automatically
using a sensor. The illuminated ring behind the control
knob lights up orange while the ventilation system is
switched on.
The run time of the automatic mode is eight hours at
most.
Switching off
Turn the control knob anti-clockwise to position 0.
14

Saturation notification

When the metal grease filter or the activated charcoal
filter (only in air recirculation mode) are saturated, a
signal sounds after the appliance has been switched off
and the illuminated ring on the control knob flashes:
Metal grease filter: Three times white, slow flashing
▯
Activated charcoal filter: Six times white, rapid flashing
▯
Do not wait any longer to clean the metal grease filters or
replace or regenerate the activated charcoal
filters.~ "Cleaning and maintenance" on page 15

Ventilation molding

If the hob extractor system is operating beside a gas
appliance, a ventilation molding (LS 041 001) must be
placed on the gas unit.
The ventilation molding improves the extraction behavior
of gas appliances and prevents small flames from being
blown out by the draught.