O Perating The Appliance; Control Panel; Intensive Setting; Intermediate Position For The Glass Front - Gaggenau AW 25 Instructions For Installation And Use Manual

Operating the appliance
en

O perating the appliance

1
T hese instructions apply to several appliance variants. It
O p e r a t i n g t h e a p p l i a n c e
is possible that individual features are described which
do not apply to your appliance.

Control panel

Symbol Explanation
#
Fan on/off
1-3 Fan settings
Ò
Intensive mode
μ
Intermittent ventilation
r

Automatic mode

œ
Metal grease filter/activated charcoal filter satu-
ration indicator
·
Hob-based ventilation control
j
Indirect LED lighting
ž
Light on/off/dimming
Setting the fan
Switching on
#
Touch the symbol.
The fan will start at fan setting 2.
Selecting a fan setting
Select the fan setting.
Switching off
#
Touch the symbol.

Intensive setting

You can use the intensive setting if there is a large build-
up of odours and fumes/vapours.
Switching on
Ò
Touch the symbol.
Note: After approx. 6 minutes, the extractor hood
automatically switches back to fan setting 3.
Switching off
If you want to end intensive mode before the preset time
expires, touch the symbol for the required fan setting.
8
Note: Switch on the extractor hood when you start
cooking and switch it off again several minutes after you
have finished cooking. This is the most effective way of
removing the kitchen fumes.
Intermediate position for the glass
front
On some appliances, the glass front can be adjusted to
an intermediate position. The intermediate position can
be used for eliminating particularly strong cooking
smells and large amounts of steam.
Take hold of the glass front in the centre and open it
carefully.

Interval ventilation

Switching on
μ
Touch the symbol.
μ
The indicator lights up. The fan will run for
approximately 6 minutes per hour at fan setting 1.
Switching off
μ
Touch the symbol.
The fan will switch to fan setting 2.
Automatic mode
Switching on
#
1 Touch the symbol.
The fan starts at setting 2.
r
2 Touch the symbol.
The optimum fan setting 1, 2, 3 or
automatically using a sensor.
Switching off
Touch any fan setting or
mode.
The fan switches off automatically if the air quality in the
room falls below a certain level.
Automatic mode can run for a maximum of 4 hours.
Ò
is set
#
to switch off automatic