Fuse Replacement - SolarEdge StorEdge Solution with Backup Installation Manual

Fuse Replacement

Replacement kits are available from SolarEdge or you can use other fuses with identical
ratings.
1. Turn OFF the inverter ON/OFF switch, and wait until the LCD indicates that the DC
voltage is safe (<50V), or wait five minutes before continuing to the next step.
WARNING!
If you cannot see the inverter panel, or if a malfunction is indicated on the
LCD panel, wait five minutes for the input capacitors of the inverter to
discharge.
AVERTISSEMENT!
Si vous ne pouvez pas voir l'écran de l'onduleur ou si un dysfonctionnement
est indiqué sur l'écran LCD, attendez cinq minutes pour que les
condensateurs d'entrée de l'onduleur soient déchargés.
2. Turn OFF the StorEdge Connection Unit and the AC switch of the distribution panel.
3. Open and remove the StorEdge Connection Unit cover.
4. For StorEdge Connection Unit - Open and remove the internal transparent cover.
5. Remove the faulty fuse from the upper board of the StorEdge Connection Unit and
replace with a new fuse.
6. Close the StorEdge Connection Unit cover(s).
StorEdge Solution with Backup MAN-01-00262-1.5
Appendix C: Replacing and Adding System Components
Figure 48: StorEdge Connection Unit fuses
141