Before You Start; Silvercrest Smart-Audio App; Configuring The Network; Led Indicators - Silvercrest SMRS 35 A1 Operating Instructions And Safety Instructions

SilverCrest SMRS 35 A1

Before you start

Remove the speaker and all accessories from the package and remove the plastic films. Verify that
you have received all items listed.

SilverCrest Smart-Audio App

This app lets you control your speaker conveniently from your smartphone or tablet PC. You can
download the "SilverCrest Smart-Audio" control app from the Apple
®
Google Play Store.
The SilverCrest Smart-Audio app allows you to navigate between the different functions, tune-in a
different radio station, set the volume, etc.
Among others, the app supports the following functions:
- Access to Internet radio stations and podcasts
- Internet Radio control
- Setup and control of a multi-room system
The SilverCrest Smart-Audio app is very intuitive, however please also read the
operating instructions for the SilverCrest Smart-Audio app.
www.silvercrest-multiroom.com

Configuring the network

The SMRS 35 A1 speaker is connected to the network via Wi-Fi. The built-in Wi-Fi antenna receives
the network router signals.
In order for the speaker to access the music files on the network, the network must meet the
following requirements:

DHCP must be enabled on the network router so the speaker can obtain an IP address
automatically.

UPnP media sharing has to be enabled on the router.
See the operating instructions for your router.

LED indicators

all LEDs off (while the power switch is
ON)
orange LED on
yellow LED on and blue LED on
blue LED flashes slowly
10 - English
Standby mode (network connection disabled)
Idle mode
Speaker is initialising
AP mode, waiting for network connection
®
App Store and from the