Copyright; Before Initial Use; Charging The Battery - Silvercrest SLM 10 C1 Operating Instructions And Safety Instructions

7. Copyright

All contents of these instructions are subject to copyright law, and are
provided to the user solely as a source of information. Any form of
copying or reproduction of data and information without the express
written permission of the author is prohibited. This also concerns
commercial use of the content and data. The text and illustrations
correspond to the technical standards at the time of printing. Subject to
alterations.

8. Before initial use

Remove the protective film from the base of the device, if needed.

8.1 Charging the battery

CAUTION! Only charge the speaker using a suitable
USB mains adapter that has an output voltage of 5 V and
an output current of at least 2 A. A USB mains adapter is
not included. Only use the USB charging cable (B)
supplied to charge the device. Never use a USB port on a
PC or laptop to charge it.
The battery must be charged in dry environments only as it
is not splash-proof when the appliance lid (9) is open.
The integrated battery must be fully charged before using the speaker
for the first time. Proceed as follows:
•
Open the appliance lid (9) on the back of the speaker.
SilverCrest SLM 10 C1
English - 41