SilverCrest SBL 3 D1
8. Before you start
8.1 Charging the battery
Before the first use or when the built-in battery is empty, charge it up as
follows:
• Open the cover for the Micro USB charging socket (6).
• Connect the charging cable (B) supplied to the Micro USB charging
socket (6) and to a free USB port on a USB power adapter (not
supplied).
• The battery indicator (11) flashes during the charging process. Once
charging is complete, the battery indicator
• After charging, disconnect the charging cable (B) and close the cover
of the Micro USB charging socket (6).
9. Getting started
9.1 Switching the speaker on and off
Press and hold the
speaker on. A sequence of beeps can be heard. The speaker starts in the
mode last used.
48 - English
A flashing battery indicator
battery is low. A beep also sounds.
button (1) for approx. 2 seconds to switch the
(11) is lit continuously.
(11) means that the