Table of Contents
Advertisement
2.4
Transport and installation
Damage due to supply lines not being disconnected!
During transport, supply lines which have not been disconnected (mains supply leads,
control leads, etc.) may cause hazards such as connected equipment tipping over and
injuring persons!
•
Disconnect supply lines!
2.5
Ambient conditions
Equipment damage due to dirt accumulation!
Unusually high quantities of dust, acid, corrosive gases or substances may damage the
equipment.
•
Avoid high volumes of smoke, vapour, oil vapour and grinding dust!
•
Avoid ambient air containing salt (sea air)!
Non-permissible ambient conditions!
Insufficient ventilation results in a reduction in performance and equipment damage.
•
Observe the ambient conditions!
•
Keep the cooling air inlet and outlet clear!
•
Observe the minimum distance of 0.5 m from obstacles!
2.5.1
In operation
Temperature range of the ambient air:
•
-20 °C to +40 °C
Relative air humidity:
•
Up to 50% at 40 °C
•
Up to 90% at 20 °C
2.5.2
Transport and storage
Storage in an enclosed space, temperature range of the ambient air:
•
-25 °C to +55 °C
Relative air humidity
•
Up to 90% at 20 °C
099-010268-EW501
28.03.2011
CAUTION
CAUTION
Safety instructions
Transport and installation
7
Advertisement
Table of Contents
Need help?
Do you have a question about the CB-007-1 and is the answer not in the manual?
Questions and answers