Advertisement
6. How to pply a New Probe Cover
(1) Place a probe cover onto the storage case hole with paper side upwards. Align the cover to
fit the hole exactly.
(2) Take the unit, vertically penetrate the probe into the center part of the probe cover.
(3) Completely push the probe into the probe cover holder hole. Push firmly.
(4) After feeling a slight click, take out the probe. The cover should be securely attached.
Please Note: Unit is calibrated to work with probe covers. Only use of ADC
racy and hygienic use.
• In order to avoid spreading germs, please use a new probe
cover for each measurement.
• Check to ensure probe cover is fitted on firmly before use
(please see the diagrams).
• If the probe cover is broken, discard and apply a new one immediately.
7. Directions for Use
Important: Prior to every measurement, fit a new undamaged Probe Cover on the measuring
probe. Failure to do so may result in incorrect temperature readings.
1. Press the ON/OFF button. The display is activated to show all symbols for 2 seconds. (Fig. 1)
2. The last measurement reading will be shown on the display automatically for 3 seconds
with the "M" symbol visible. (Fig. 2)
3. A beep sound is heard. The °C or °F symbol will flash. The thermometer is ready to
measure. (Fig. 3)
4. Straighten the ear canal by pulling the outer ear up and back to give a clear view of the
eardrum.
• Children ages 1 year to adult: Pull the ear up and back. (Fig. 4)
(Caution: Many pediatricians suggest use of ear thermometers for children older than 6
Last reading stored in memory.
Ready to measure.
Measurement complete
°F or °C stops flashing.
Low battery indication. Unit will
not take accurate
measurements.
The last reading will be shown on the
display automatically for
3 seconds.
The unit beeps once and the
°F or °C icon is flashing.
Unit beeps once.
When the °F or °C starts to flash you
can take another temperature.
The battery icon will flash to remind
the user to replace the battery.
®
probe covers ensures accu-
(X) Incorrect
(
) Correct
Advertisement
