Xceltronix autoCLOSER Series Installation Manual And User's Manual page 9

2. Connect power to the Autocloser. The Autocloser uses a 110 Volt AC ' DC power
adapter. The .\utoc)oser is shipped with the power adapter already connected to the
und (Fig. 2-1). No additional connections are required.
Fig 2-1
Plug the Autocloserpower adapter into a 110volt AC receptacle(Fig. 2-2).
Plug lllC
Ault)Cl0SLT
ptnvcr adapter
into a 110 volt
AC outlet.
Fig. 2-2
Bundle
wires with
twist tie.