Xceltronix autoCLOSER Series Installation Manual And User's Manual page 10

THE PO\)t^R ADAPTER MUST BE COMPLETELY PLUGGED IN TO INSURE
THAT IT STAYS IN THE OUTLET AND PROVIDES UNINTERRUPTED POWER
TO THE AUTOCLOSER.
Bundle excess wire in a roll and apply a twist tie. to prevent it from hanging down and be
coming an obstruction.
3. Determine the Aulocloser mounting location. The Autocloser uses an infrared
emitter/detector to determine the position of the garagedoor. Notethe position (Fig.
3-1) of the infrared sensors. To ensure correct operation,the Autocloser unit must
be nomorethan 36 inches fromthe reflector platewhen the dooris fully open.
Fig. 3-1
Infrared
Sensors