Camera Carrier; Camera; Figure 10: Camera Components - KELCH KENOVA set line V9 Series Operating Instructions Manual

4. Operating

4.3.5 Camera carrier

KENOVA set line V9xx(-S) is supplied with a camera system.
The camera/optics carrier is so positioned during a measuring operation that the edge
of the tool to be measured lies between the light source and the measuring optics.
The operation of the measurement control unit is described in a separate set of operat-
ing instructions.

4.3.6 Camera

1
2
3
With the camera, the checking of the measurement position is made via the
screen of the measurement control unit. With the suitable choice of measurement
program, it suffices to position the measured edge in the display range, then the
edges can be automatically determined by the image processing software.
Note!
KENOVA set line V9xx(-S)
Kelch GmbH · Werkstraße 30 · D-71384 Weinstadt-Endersbach · Tel. (+49)7151 20522 0 · Fax (+49)7151 20522 11 · info@kelchgmbh.de

Figure 10: Camera components

1 Camera/optics carrier
2 Handle for quick adjustment of X, Z
3 Release buttons X, Z
Here, observe the operating instructions for the measurement
control unit!
© Kelch GmbH 2014
4 CMOS camera with ring light
5 Back light
5
4
Page 25