Table of Contents
Advertisement
3 Commissioning
3.1 Transportation / Packaging / Storage
The appliance is dispatched in sturdy boxes. The considerable weight can result in inju-
ry if the box falls.
Caution!
If the appliance is delivered in the transportation container (shipping crate), all infor-
mation required for unloading (hoisting points, crane load) must be printed on the out-
side of the crate.
If the appliance is sealed in film, the film must not be damaged during storage! Other-
wise, warranty claims against KELCH GmbH are invalid!
3.2 Scope of delivery:
Upon receipt, immediately check the completeness of the delivery based on the dis-
patch documents and packaging lists. The haulage company is liable for any damage
during transportation!
Page 16
Kelch GmbH · Werkstraße 30 · D-71384 Weinstadt-Endersbach · Tel. (+49)7151 20522 0 · Fax (+49)7151 20522 11 · info@kelchgmbh.de
Risk of injury!
If a box falls, it can cause injuries! Always make sure that the ap-
pliance stands firmly and is well secured during all stages of
transportation!
Caution during unloading! It is essential to prevent knocks to ma-
chine components and that they are not dropped!
Make sure that the rated load capacity of the crane is sufficient!
Chains, ropes, hooks and lifting eyes must be fully serviceable
and also designed for the weight of the appliance.
For the weight data, refer to the table in the Technical Data in
these instructions. If there is no suitable hoisting equipment
available, unloading must be carried out by an appropriate haul-
age company.
Do not lift the machine parts in jerks!
It is forbidden to remain below a suspended load, it is a danger to
life!
Securing means must be installed for transportation.
KENOVA set line V9xx(-S)
3. Commissioning
© Kelch GmbH 2014
Advertisement
Table of Contents
