Table of Contents
Advertisement
2. Safety
2.7 Dangerous areas on the appliance and during operation
Item
Dangerous area
1
Tool
2
Take-up spindle
Induction coil
3
(only with
V9xx-S)
Induction coil
4
(only with
V9xx-S)
Shrink chuck
5
(only with
V9xx-S)
Cooling unit,
motor housing,
refrigerant
6
pressure lines
(only with
V9xx-S)
KENOVA set line V9xx(-S)
Kelch GmbH · Werkstraße 30 · D-71384 Weinstadt-Endersbach · Tel. (+49)7151 20522 0 · Fax (+49)7151 20522 11 · info@kelchgmbh.de
Hazard
Safety instructions
Cuts
Wear gloves
Avoid getting fingers jammed when insert-
ing and loosening the tool! Wear clean
Crushing,
gloves. No loose objects such as neck-
danger of being
laces or other hanging jewellery may be
drawn in
worn as they can become jammed and
draw the operator into the machine.
Do not permit persons with active (e.g.
pacemaker) and, in certain cases, also
passive medical implants, to work on this
Electro-
appliance, or allow interference-sensitive
magnetic
appliances to be exposed to the electro-
radiation
magnetic field of the system. For safety
reasons, these persons must not go
nearer than 3 m to the appliance.
During shrinking, residual cooling lubri-
cants, oils or greases can vaporise or
Vapours
create dust. These vapours can contain
harmful to
carcinogenic substances and are harmful
health
to heath. Therefore keep a safe distance
and do not inhale these!
Burns
Wear thermally insulating gloves
Continuous operation can give rise to high
temperatures on the motor housing and
Burns
the refrigerant pressure lines. So always
wear protective gloves when filling the
unit.
© Kelch GmbH 2014
Page 11
Advertisement
Table of Contents
