Operating; General Remarks On Operating The Electronic Measuring Equipment; Components; Figure 8: Components Kenova Set Line V9Xx(-S) - KELCH KENOVA set line V9 Series Operating Instructions Manual

4 Operating

4.1 General remarks on operating the electronic measuring equip-
ment
- The electronic equipment is completely wired up
- Any connectors for the peripherals are located at the rear
- The electronic measurement equipment is fitted with interference suppres-
sion filters
- Measurement cables and other connectors are labelled precisely
- Do not install the tool setter in the immediate vicinity of:

4.2 Components

1
2
3

Figure 8: Components KENOVA set line V9xx(-S)

1. Operating panel with touch screen
2. Main switch
3. Switch cabinet
4. Camera carrier with one-hand operation
5. Drawer for storage
Page 22
Kelch GmbH · Werkstraße 30 · D-71384 Weinstadt-Endersbach · Tel. (+49)7151 20522 0 · Fax (+49)7151 20522 11 · info@kelchgmbh.de
o Spark erosion machines
o Electric welding systems
o Cable contactors and circuit breakers
o Electrostatic painting systems and similar facilities
4
6. Screen for measurement control unit
7. Cooling system (only with V9xx-S)
8. Take-up spindle
9. Storage tray for spindle inserts
10. Shrink tower (only with V9xx-S)
KENOVA set line V9xx(-S)
4. Operating
10
6
8
9
5
© Kelch GmbH 2014