4. Operating
4.3 Measuring
4.3.1 Operating panel
Figure 9: Operating elements of KENOVA set line V9xx(-S)
Functions of the buttons:
1
Tool clamping / releasing
2
Lamp test
3
Axis Stop
4
Activate / release spindle brake
Blow the tool out of the spindle to facilitate the
5
removal of the complete tool
6
Handwheel for fine adjustment X-Axis
4.3.2 Axis travel
The axes of the KENOVA set line V9xx(-S) can be moved in number of different ways:
-
Manual driving of the linear axes with the selective one-hand operation:
o The upper button (on the camera carrier) releases only the Z-axis
o The lower button (on the camera carrier) releases only the X-axis
o Both buttons can also be pressed simultaneously
-
Manual rotation of the C-axis (spindle)
o Release of the spindle with the button "release spindle coupling" allows
this to be rotated to any desired position
KENOVA set line V9xx(-S)
Kelch GmbH · Werkstraße 30 · D-71384 Weinstadt-Endersbach · Tel. (+49)7151 20522 0 · Fax (+49)7151 20522 11 · info@kelchgmbh.de
7
8
9
10
11
12
© Kelch GmbH 2014
Handwheel for fine adjustment Z-Axis
Handwheel for fine adjustment C-Axis
Navigation buttons for Z-Axis
Navigation buttons for X-Axis
Additional button for fast movement of Axis
Navigation buttons for C-Axis
Page 23