Danger From Electromagnetic Radiation; Pneumatic Supply; Dangers Arising From Hydraulic And Pneumatic Power - KELCH KENOVA set line V9 Series Operating Instructions Manual

Table of Contents

Advertisement

2.8.1 Danger from electromagnetic radiation

When the system is used as intended, there are no electromagnetic radiation effects on
the environment. If the induction heating is started with no shrink chuck in the coil, the
magnetic field affects the immediate area in the coil.
Caution!
Prohibited!
Warning!

2.9 Pneumatic supply

Work on the pneumatic system may only be carried out by specialists, taking the guide-
lines and regulations which apply at the installation site into consideration. If this is not
complied with, Kelch GmbH will decline any liability.

2.9.1 Dangers arising from hydraulic and pneumatic power

Caution!
Caution!
Page 14
Kelch GmbH · Werkstraße 30 · D-71384 Weinstadt-Endersbach · Tel. (+49)7151 20522 0 · Fax (+49)7151 20522 11 · info@kelchgmbh.de
Risk of damage to property!
Do not bring any interference-sensitive devices into the vicinity of
the system!
Danger of injury!
Staff with active medical implants are not permitted to work with
this appliance and, for safety reasons, must not go nearer than
one metre to the appliance.
Warning of toxic substances!
During shrinking, residual cooling lubricants, oils or greases can
vaporize. Do not inhale oil mist! Oil mist is harmful to health and
can contain carcinogenic substances.
Risk of damage to property!
If damage to pressure hoses and pipes as well as screwed con-
nections is detected (e.g. abrasion marks or leaks), the tool pre-
setter with combined shrink fit must be switched off immediately
and may not be brought into operation again till the defects have
been remedied.
Danger of injury!
Danger of injury from leaks of high-pressure media
KENOVA set line V9xx(-S)
2. Safety
© Kelch GmbH 2014

Advertisement

Table of Contents
loading

Related Products for KELCH KENOVA set line V9 Series

This manual is also suitable for:

Kenova set line v9 s series

Table of Contents