Bomag BPH 80/65 Operating Instructions, Maintenance Instructions page 42

M a i n t e n a n c e e v e r y 6 m o n t h s
Maintenance every 6 months
4.13 Changing the engine oil
Danger
!
Danger of scalding! When draining off hot en-
gine oil.
Environment
Catch running out fuel, do not let it seep into
the ground and dispose of environmentally.
Caution
!
Drain the engine oil at operating temperature.
Stand the machine on level ground.
Change the engine oil filter with every oil
change.
Open the front hood.
l
Fig. 43
Pull the dipstick (Fig. 43) out.
l
4 2
Fig. 44
Unscrew the oil drain plug and catch running
l
out oil (Fig. 44) .
Clean the plug and screw it back in with a new
l
seal ring.
Caution
!
Clean the engine oil filter before filling in new
oil, refer to the next section.
Fig. 45
Unscrew the oil filler neck cap.
l
Fill in new engine oil (Fig. 45) .
l
For quality and quantity of oil refer to the table
of fuels and lubricants.
Insert the oil dipstick and check the oil level.
l
Unscrew the oil filler neck cap.
l
After a short test run check drain plug and oil
l
filter for leaks.
Close the rear hood.
l
B O M A G
BPH 80/65