4.3 Setting up and aligning scale
Spirit level
5. OPERATION
5.1 Weighing
Starting the weighing procedure
kg
Weighing babies/toddlers (2-in-1)
2-in-1 key
1. Place the scale on a firm surface.
2. Align the scale by turning the foot screws.
The air bubble in the spirit level must be located in the exact center of the
circle.
3. Ensure that only the feet of the scale are in contact with the ground. The
scale may not be in contact anywhere else.
NOTE:
The alignment of the base of the scale must be checked every time
the scale is moved and corrected if required.
1. Ensure that there is no load on the scale.
2. Press the
appears in the display, then all the elements of the display are
shown briefly.
The scale is operational when
If the scale is operated with a power supply unit, the
the display.
3. Switch the weight display if necessary (see "Switching weight unit" on
page 12).
4. Stand on the scale and keep still.
NOTE:
The HOLD function is activated automatically at weights of over 1.5 kg
or 3.3 lbs. The display flashes until a stable weight has been mea-
sured. The display then freezes until the next weighing operation.
5. Read off the measured result.
The
2 in 1
dlers. The child is held in an adult's arms during weighing to do so. Proceed
as outlined below.
1. Ensure that there is no load on the scale.
2. Ask the adult to stand on the scale.
3. Read off the measured result.
4. Keep the
display.
The weight is saved.
appears in the display.
ATTENTION!
Incorrect measurement as a result of changing starting weight
If weighing of the child commences with a different starting weight, it
will not be possible to determine the child's weight correctly.
►
►
key.
start
HOLD appears in the display.
function can be used to determine the weight of babies and tod-
key depressed until the message NET appears in the
2 in 1
Ensure that the child is always weighed with the adult with whom the
starting weight was determined.
Ensure that the adult's weight does not change - as a result of their
taking off a piece of clothing, for example.
appears in the display.
symbol appears in
Operation • 11
English