Download Print this page
KSB Ixo RW Manual
KSB Ixo RW Manual

KSB Ixo RW Manual

Submersible motor pump for floating-suction water intake

Advertisement

Quick Links

Betriebsanleitung
5603.8/2-90
Diese Betriebsanleitung enthält wichtige Hin-
weise und Warnvermerke. Bitte vor Einbau,
elektrischem Anschluß und Inbetriebnahme un-
bedingt lesen. Weitere Betriebsanleitungen, die
Komponenten dieses Aggregates betreffen,
sind zusätzlich zu berücksichtigen.
Diese Betriebsanleitung soll in der Nähe des Ag-
gregats aufbewahrt werden.
These operating instructions contain fundamen-
tal information and precautionary notes. Please
read the manual thoroughly prior to installation
of unit, electrical connection and commission-
ing. It is imperative to comply with all other ope-
rating instructions referring to components of in-
dividual units.
These operating instructions must be kept close
to the location of operation of the pump unit for
easy access.
Ixo RW / Ixo RWS
Unterwasser-Motorpumpe
mit schwimmender Entnahme
Submersible Motor Pump
for Floating-suction Water Intake
Pompe immergée
avec aspiration flottante
Onderwatermotorpomp
met drijvende afname
Cette notice de service comporte des instruc-
tions et des avertissements importants. Elle doit
être lue impérativement avant l'installation, le
branchement électrique et la mise en service.
Les notices de service relatives aux compo-
sants de ce groupe sont également à respecter.
Il est recommandé de conserver cette notice à
proximité de la pompe.
Dit bedrijfsvoorschrift bevat belangrijke aanwij-
zingen en waarschuwingen. Wij vragen u drin-
gend dit bedrijfsvoorschrift voor het inbouwen,
de elektrische aansluiting en het in bedrijf ne-
men te lezen. Er dient bovendien rekening te
worden gehouden met de overige bedrijfsvoor-
schriften, welke betrekking hebben op de com-
ponenten van dit aggregaat.
Het bedrijfsvoorschrift moet altijd direct bij het
aggregaat beschikbaar zijn.
ab Serie S-A
From series S-A
à partir de série S-A
vanaf serie S-A

Advertisement

loading
Need help?

Need help?

Do you have a question about the Ixo RW and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for KSB Ixo RW

  • Page 1 Ixo RW / Ixo RWS Betriebsanleitung 5603.8/2-90 Unterwasser-Motorpumpe mit schwimmender Entnahme Submersible Motor Pump for Floating-suction Water Intake Pompe immergée avec aspiration flottante Onderwatermotorpomp met drijvende afname ab Serie S-A From series S-A à partir de série S-A vanaf serie S-A Diese Betriebsanleitung enthält wichtige Hin-...
  • Page 2 Ixo RW / Ixo RWS Konformitätserklärung / EC declaration of conformity / Déclaration «CE» de conformité / Verklaring van overeenstemming Hiermit erklären wir, dass das Pumpenaggregat Herewith we declare that the pump unit Par la présente, nous déclarons que le groupe électro-pompe...
  • Page 3: Table Of Contents

    Ixo RW / Ixo RWS Inhaltsverzeichnis Sommaire Seite Page Allgemeines Généralités Sicherheit Sécurité Anwendungsbereich Conditions d’utilisation Aufstellung Installation Elektrischer Anschluss Branchement électrique Inbetriebnahme Mise en route Wartung Entretien Demontage Démontage Ersatzteile Pièces de rechange Teile-Benennung Nomenclature Fabrikschild Plaque signalétique Wiederverwertung...
  • Page 4: General

    General Instructions attached directly to the machine, e.g. -- arrows indicating the direction of rotation This KSB pump has been developed in accordance with state- -- markings for fluid connections of-the-art technology; it is manufactured with utmost care and must always be complied with and be kept in a perfectly legible subject to continuous quality control.
  • Page 5: Operating Conditions

    Ixo RW / Ixo RWS Unauthorised Modification and Manufac- located less than 15 cm above the floor of the reservoir, so that the layer of deposits on the floor remains intact. The suction ture of Spare Parts nozzle’s reach can be limited by means of a float switch which Modifications or alterations of the pump are only permitted switches off the pump.
  • Page 6: Commissioning / Start-Up

    F Pump models Ixo RW/Ixo RWS are supplied with a built-in Disconnect the pump from the electrical power supply before thermostatic switch. The motor will switch itself off when- embarking on any remedial action and make sure it cannot be ever the temperature exceeds the permissible limit value.
  • Page 7: Spare Parts

    Ixo RW / Ixo RWS Dismantling Oil Chamber Checking the Pump for a Jammed Shaft If the oil chamber has to be inspected, follow these instruc- tions: Remove the pump from the PE casing by unscrewing the three screws (900.05) and lifting it out of the casing in upward direc- CAUTION: The oil in the oil chamber may be pressurised.
  • Page 8: Recyling

    Ixo RW / Ixo RWS = Spare part Name Plate Recyling Ixo RW/Ixo RWS systems consist of materials that can be sep- arately recycled. Plastic components are marked in accordance with ISO 11 469. Serial No. The name plate is located on the sheet metal jacket (right-hand side).
  • Page 9 Ixo RW / Ixo RWS...

This manual is also suitable for:

Ixo rws