Table of Contents
Advertisement
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
STEP 6：
Connect Middle Wire (No. 78) with
Needle Sensor Wire (No. 79) and
connect the Hand Pulse Wire 2 (No.
81) with Hand Pulse Wire 3 (No. 82).
Pull Tension Control Wire (No. 73)
out from Main Frame (No. 1), then
insert Tension Control Wire (No. 73)
from the bottom of Front Post (No. 2)
and pull it out from the side hole of
Front Post (No. 2).
Attach the Front Post (No. 2) to the
Main Frame (No. 1), then remove Bolt
(No. 35) and Washer (No.36) from
Tension Control Knob (No. 72).
Connect Tension Control Knob (No.
72) with Tension Wire (No. 73) and
attach Tension Control Knob (No. 72)
on Front Post (No. 2) using Bolt (No.
35) and Washer (No.36) that were
removed.
CAUTION: Please make sure the
Tension Control Knob (No. 72) is at
the lowest resistance level (level 1, all
the way to the left) before you connect
any wires together.
Secure Front Post (No. 2) and Main
Frame (No. 1) using 4 Bolts (No. 21),
2 Flat Washers (No. 23) and 2 Arc
Washers (No. 26). Tighten and secure
with Wrench (No. B).
7
Hide quick links:
Advertisement
Table of Contents
