Table of Contents
Advertisement
FUNCTION BUTTONS
MODE: Press to display different function selections on LCD.
Press and hold for 3 seconds to reset all values except odometer to
zero.
SET:
To set up the target value for TIME, DISTANCE, and CAL. Press
and hold for 2 seconds to speed up the increment.
RESET: Press to reset function value during setting.
Press and hold for 3 seconds to reset all value except odometer to
zero.
NOTE: Replacing the batteries will reset all values to zero
automatically.
FUNCTIONS & OPERATIONS
1. AUTO ON/OFF:
Once you begin to exercise, workout value will display on the LCD automatically. After
approximately 4 minutes of inactivity, the computer will turn off.
The value on odometer does not reset to 0 every time the computer turns off and will continue to
accumulate when you resume to exercise.
2. AUTO SCAN:
After the computer is powered on, press Mode and the LCD will display all functions
TIME-SPEED-DISTANCE-CALORIES-ODOMETER-PULSE. Each value will be shown for 6
seconds.
3. SPEED:
Displays the current training speed from 0.0 to 99.9 MPH (miles per hour)
4. DISTANCE:
Accumulates total distance from 0.00 up to 999. Press SET & MODE button to set your target
distance and it will automatically count down from target value once you start exercise. Each
increment is 0.1 M (miles). When distance is over 100 miles, each increment will be 1M (miles).
5. TIME:
Accumulates total time from 00:00 up to 99:59. Press SET & MODE button to set your target
time with increment of 1 minutes and it will automatically count down from target value once you
start exercise.
EXERCISE METER
11
Hide quick links:
Advertisement
Table of Contents
