Left Version; Right Version - SystemAir SAVE VTC 500 User Manual

12 | Maintenance
3.5.1

Left version

1. Stop the unit by disconnecting the mains.
2. Open the front hatch. See chapter 3.2.
3. Pull out the exchanger using the strap at the front.
See chapter 3.4
4. Remove knobs that hold fans in place.
5. Disconnect the fast couplings
6. Carefully disconnect the tube for pressure measurement.
7. Once everything is disconnected, pull out the fans.
8. Clean the fan using a cloth or a soft brush. Do not use water. White spirit can be used to remove obstinate settle-
ments. Allow to dry properly before remounting.
9. Remount fans, reconnect fast couplings and tubes.
10.Close and lock the front hatch and connect the unit to mains.
3.5.2

Right version

1. Stop the unit by disconnecting the mains.
2. Open the front hatch. See chapter 3.2.
3. Remove knobs that hold fans in place.
4. Disconnect the fast couplings
5. Carefully disconnect the tube for pressure measurement.
6. Once everything is disconnected, pull out the fans.
GB
212913 | 01_1.8.0