Filter Sensor; Led Patterns; Maintenance - Black+Decker Dustbuster DVJ215J Original Instructions Manual

ENGLISH
A. Filter sensor
Whenever a filter is Blocked and needs cleaning, the red
filter LED (A) in the handle will illuminate. Clean fine
dust from filter (See section on 'cleaning filters' in this
manual).
B. LED Charging display
The charging display LED (B) will illuminate when the
unit is charging and will indicate (flash) when further
charging is required.
C. BOOST mode
LED (C) Illuminates when the appliance is in BOOST
mode.
Dual LED Display - DVJ215J, DVJ315J,
DVJ320J, DVJ325J
B. LED Charging display
Battery icon will flash when the battery is almost
depleted charging. It will also flash during charging (See
LED pattern chart in this manual).
C. BOOST mode
Illuminates when the appliance is in BOOST mode.
8
(Original instructions)

LED Patterns

Cleaning the filters (Fig. E, F, G, H, I, J)
• Press the dust bowl release button (12) (Fig. E)
• Eject the dust bowl (6) (Fig.F)
• Lift the filter assembly (10) using the metal handle
provided from the dust bowl (6)
Note: On unit DVJ325BFS the pre filter is impregnated with a
fragrance allowing for a pleasing odour to be released when
the appliance is in use.
• Empty the dust bowl (6) by lightly shaking over a dustbin
(Fig. H).
• The filter (11) can now be removed from the filter
assembly (10)
DVJ215J, DVJ315J, DVJ320J, DVJ325J (Fig.I1).
DVJ325BF, DVJ325BFS (Fig. I).
• Empty any remaining dust from the dust bowl.
• Rinse out the dust-bowl with warm soapy water.
• Wash the filters with warm soapy water (Fig. J).
• Make sure the filters are dry
• Refit the filters into the appliance.
• Close the dust-bowl. Make sure the release latch (8)
clicks into place.
Warning! Before performing any maintenance or cleaning on
the appliance, unplug the appliance.
From time to time wipe the appliance with a damp cloth. Do
not use any abrasive or solvent-based cleaner. Do not
immerse the appliance in water

Maintenance

Your BLACK+DECKER cordless appliance has been
designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on cordless
appliances:
• Run the battery down completely if it is integral and then
switch off.
• Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
• Regularly clean the ventilation slots in your appliance/
charger using a soft brush or dry cloth.
• Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Charging
Battery Fault
Charger Fault
Battery Hot