Garland 9501 Programming Instructions

Change a Menu item 4:1
1. Press and hold the "PROGRAM" key (5 sec) or
until the software version is displayed.
GC450 V.06.31
2. Press the "PROGRAM" key Twice until
"SYSTEM SETUP" appears.
SYSTEM SETUP
3. Press and hold the "UP ARROW" key
(approximately 8 sec) until Gap Calibration
appears.
GAP CALIBRATION 0000
4. Press the "PROGRAM" key twice
for "MENU ITEMS".
5. Press the "MENU SELECT" key twice for
"4:1 Clam Yes".
4:1 CLAM YES
NEW 4:1 MULTI-STAGE COOKING ON IRON
PROGRAMMING INSTRUCTIONS
MENU ITEMS
NOTE: Press the "TEMP" key for each level.
Press the "UP ARROW" key to change the
flashing number and press the
"RIGHT ARROW" key to move to the next digit.
6. Press the "Temp" key: Remove In: 120 sec
REMOVE IN
7. Press the "TEMP" key:
Alarm: select the "Auto" key to toggle between
Auto or Manual - select : "AUTO"
ALARM:
8. Press the "TEMP" key: Gap Settings: .500
GAP SETTING
9. Press the "TEMP" key: Stage 1 Time: 10 sec.
STAGE #1 TIME
10. Press the "TEMP" key: Stage 1 Gap: .425
STAGE #1 GAP
Page 1of 2
050716
MODEL 9501
INFINITE GAP GRILL
120
AUTO
.500
010
.425