Tour Party Listen Using Dlr50; General Notes - Williams Sound Digi-Wave DLT 100 Quick Manual

QUICK GUIDE—TOURGUIDE + INTERPRETER MODE
Once you have switched ON the DLT100 for the tourguide and interpreter(s) you can
proceed to switch ON the DLR50 receivers for the tour party.
TOUR PARTY
LISTEN USING DLR50
USES 2xAAA ALKALINE BATTERIES (DISPOSABLE)
To turn on the DLR50 receiver, push and hold
the Power ON/OFF button.
The receiver will automatically select the
first interpreter language, channel 01.
If the display flashes "88" ...
hold down the Channel UP/DOWN
buttons together for 3 seconds until the
display flashes "Gr". Press UP or DOWN
to select "17", then hold down the UP/
DOWN buttons for 3 secs to save.
To select the next language (if available) press
the CHANNEL UP/DOWN button briefly,
the unit will scroll to the next available
channel; repeat until the desired channel
is selected.
The main speaker (floor language) is
always channel 00.

GENERAL NOTES

REHEARSE & TEST: obvious maybe, but allow time to familiarise yourself with the system operation
and walk a rehearsal tour with colleagues, so you know what your visitors will experience.
RANGE: up to 100ft (30m) indoors and up to 200ft (60m) outdoors (line-of-sight, depending on
conditions).
MULTIPLE TOURS: ensure returning groups keep the receivers with their corresponding tourguide—
dedicate a table-top for each group so the guides know where to return the receivers.
0845 5576555
www.tourguide-systems.co.uk
DigiWave hire system
WITH A PLUG-IN
EARPIECE,
HEADPHONES,
EARDEFENDER
HEADPHONES
or NECK LOOP (for
hearing aid users).
AND LASTS 24HRS.
Page 2
Out of hours try:
07973 395180 or 07973 759174