Settings - Kenwood DRV-A501W Instruction Manual

Gps integrated dashboard camera
Hide thumbs Also See for DRV-A501W:
Table of Contents

Advertisement

Settings

Access the SETUP MENU by pressing the MENU button twice.
Use the UP and DOWN buttons to select setting options and press the OK button to
enter the sub-menu.
Once you access the sub-menu, highlight the desired setting and press the OK button to
confirm your selection and to return to the SETUP MENU.
Press the MENU button to return to the current mode.
Note: The default settings have been selected for great image quality and ease of operation.
Under most circumstances, you don't need to change the settings.
Note: The setup menu cannot be accessed while the camera is recording.
Wireless Link: The Wireless Link function allows you to use your smartphone to connect
with the device.
OPTIONS: On/Off(default)
Format SD Card: Format the memory card. Formatting will remove ALL the files in
the card.
OPTIONS: Yes/No
Device Sounds: Adjust the button beep sound, voice recording, and Announcements.
OPTIONS:
Beep: On (default)/Off
Audio Rec: On (default)/Off
Announcements: On/Off (default)
Time & Date: Adjust the TIME and DATE as required by using use the UP and
DOWN buttons to set the value. Press the OK button to save the setting and press
the MENU button to return to the SETUP MENU.
Time Zone/DST: Select the time zone setting.
OPTIONS: -12/-11/-10/-9/-8/-7/-6/-5/-4/-3.5/-3/-2.5/-2/-1/GMT/
+1/+2/+3/+4/+5/+6/+7/+8/+9/+10/+11/+12
Wireless Link
Format SD Card
Device Sounds
Time & Date
Enter
OK
31
JUL
7
Back
MENU

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents