Mounting The Light Fixture - Home Zone Security AEC-326KA2-AC14W Manual

INSTALLATION (Continued)

3 Mounting the Light Fixture

 Install the Light Fixture ( A ) to the Sponge foam ( I ) and Cross Bar ( E ) with affixed
Note: Make sure all the wires are inside the junction box or the light before attaching the light to
the junction box.
4 Caulking Around the Light Fixture
 Caulk around the canopy and mounting surface with silicone sealant (not included).
Note: If you install this light fixture on the wall or eave without junction box. You can use Plastic
masonry plug ( G ) and Mounting Screws ( F ) to install this light fixture on the wall or eave
directly.
6
back plate Screws ( B ) and Screw Nuts ( C ) and rubber ring ( H ).