Installation; Wiring The Light Fixture - Home Zone Security AEC-326KA2-AC14W Manual

INSTALLATION

1 Installing the cross bar
 Before installing the Cross Bar
( E ) to the junction box, Screw
the two Back Plate Screws ( B )
to the Cross Bar ( E ) first.
 Line up the holes on the cross
bar with the holes on your
junction box. Using the two
Mounting Screws ( F ) attach
the Cross Bar ( E ) to your
junction box.
 Keep the Bar screwed with Back
Plate Screw ( B ) in the horizontal
direction then fix it tightly.
WARNING: Risk of electric shock. Disconnect power at fuse or circuit breaker

2 Wiring the Light Fixture

CAUTION: Do not cut any wires with factory installed wire connectors or
remove the wire connectors.
 Connect the light fixture wires to the junction box wires with Wire Nut ( D ).The wire should
pass through the Sponge foam ( I ).
 White to white
 Black to black
 Green ground wire to house ground
Note: Make sure the polarity is correct.
5
before installing or servicing.