Home Zone Security ES00726V Installation Instructions

Solar power motion activated security light

Advertisement

s e c u r i t y

IMPORTANT SAFETY OPERATING INSTRUCTIONS

1.
Please read all warning and instruction labels which are included in the box and fixture to avoid personal injury, property damage
caused by fire, cuts, bruises, death and other dangers.
2.
Please follow these general precautions before installing, maintaining, or fixing
1. To prevent possible SERIOUS INJURY or DEATH never allow small children near batteries. If battery is swal-
lowed, immediately notify a doctor.
2. Your solar light may not function in temperatures below -4º F (-20º C) or above 122º F (50º C).
3. Use a rechargeable battery only. Recycle or dispose of batteries properly.
4. Do not open, short circuit, or mutilate batteries as injury may occur.
PRECAUTION
1.
This fixture should be installed outdoors to a wall.
2.
The light fixture should be mounted approximately 8 ft. (2.4m) above the ground.
3.
Do not immerse components in liquid.
4.
This device complies with Part 15 of FCC Rules. Operation is subject to the following two condition: (1) This device may not cause
harmful interference, and (2) This device must accept any interference received, including interference that may cause undersired
operation.
REF. PARTS
PARAMETER:
1.
Illumination output: approx. 950 lumens / 6000K
2.
Sensor detect range: 38 feet x 180 degree
3.
Power source: 1 x 3.7V 1500mAh Lithium rechargeable battery
www.homezonesecurity.com
Solar Power Motion Activated Security Light
A: Solar panel with 15 feet cord x1pcs
B: Light fixture x1pcs
C: Battery (Pre-assembled) x1pcs
AA: Fixture/Solar panel mounting screw x5pcs
BB: Wall anchor x5pcs
Model No. ES00726V
(888) 782-5618

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ES00726V and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Home Zone Security ES00726V

  • Page 1 Solar Power Motion Activated Security Light Model No. ES00726V s e c u r i t y IMPORTANT SAFETY OPERATING INSTRUCTIONS Please read all warning and instruction labels which are included in the box and fixture to avoid personal injury, property damage caused by fire, cuts, bruises, death and other dangers.
  • Page 2 Solar Power Motion Activated Security Light Model No. ES00726V s e c u r i t y HOW TO OPERATE AND INSTALL Figure 1 Figure 1: Mounting the light fixture * Locate area in which you would like to install your light fixture.
  • Page 3: Cleaning And Maintenance

    Solar Power Motion Activated Security Light Model No. ES00726V s e c u r i t y Figure 6: Testing the motion sensor Figure 6 * Slide the power switch on the front of light fixture housing to the AUTO position.

Table of Contents