Pre-Installation - Home Zone Security AEC-326KA2-AC14W Manual

PRE-INSTALLATION

Before beginning assembly of the product, make sure all parts are present. Compare parts
with package contents list and hardware contents. If any part is missing or damaged, do
not attempt to assemble the product.
Estimated Assembly time: 30 minutes.
Note: Fixture should be installed by persons with experience
in household wiring or by a qualified electrician. The
electrical system and the method of electrically connecting
this fixture to it must be in accordance with the National
Electrical Code and local building codes.
 Install the motion sensor 6.5 – 10 feet above the ground.
Motion sensor is less sensitive above 10 feet.
 Locate motion sensor so motion moves across detection
zone.
 Locate sensor away from heat producing sources to
prevent false triggering. Also be very careful not to
include objects such as windows, white walls and water
in the detection zone.
 Locate fixture away from moving objects such as trees
and street traffic.
 Do not install more than one motion sensor light on one
wall switch.
 Suitable for wall or eave mounting.
MOUNTING LOCATIONS
 Determine the mounting location – a wall or under an eave.
 Position the lamphead in the general direction of the
desired light coverage.
 If needed, lift the motion sensor up and rotate it so the
controls face the ground after installation.
Note: Do not mount this light fixture on the ground.
3