Triple head led motion sensor security light (6 pages)
Summary of Contents for Home Zone Security ES00931G
Page 1
SMART AUTO CCT TRIPLE HEAD ® SECURITY FLOOD LIGHT ES00931G INSTALLATION INSTRUCTIONS the bright way to do home security. PDS 540 File Information Division: 20211218 Packaging Design T101P61Z01 File NO.: Implement Confirmation Client: Amazon Client ID: Item NO.: 10163406 ES00935G...
Page 2
Warning PLEASE READ CAREFULLY AND SAVE THESE INSTRUCTIONS, AS YOU MAY NEED THEM AT A LATER DATE. IMPORTANT SAFETY OPERATING INSTRUCTIONS 1. Please read all warning and instruction labels which are included in the box and fixture to avoid personal injury, property damage caused by fire, cuts, bruises, death and other dangers.
Page 3
Ref. Parts PREPARATION Tools required for assembly (not included): phillips screwdriver, safety goggles, power drill and ladder. Light fixture Small Mounting Bolt Decorative Cover F x 2 Mounting Plate Mounting Bracket #6-32 X 1/2” Junction Box Screw G x 2 I x 3 #8-32 X 1/2”...
Installation Installing the Mounting Bracket *Align the holes on the mounting bracket (E) with the holes on your junction box. * Lock the two mounting screws (F or G) to the junction box. Note: *Make sure the mounting bracket with the stamped word "FRONT" facing away from the junction box.
Page 5
Installing the Mounting Plate • Place the mounting plate (D) against the junction box. When installing the mounting plate to a wall, the “arrow” must be upward. When installing the mounting plate to an eave, the “arrow” must be toward the house. •...
Use silicone caulk to seal completely around the gap between the mounting bracket and the wall. Note: If you install this light fixture on the covered wall or eave without junction box, you must consult a qualified, licensed electrician and use the appropriate screws (not included) to install this light fixture on the wall or eave directly depending on the surface.
Page 7
Start Setting Smart Auto CCT Triple Head Security Flood Light After the smart security light is connected to electricity , the floodlight will be flashing, then you can start pairing the Home Zone Smart APP. Short press the ON/OFF button in loop, there will be three models. 1.
Page 8
Setup the Smart Auto CCT Security Light After the smart light is connected to electricity , the security light will be flashing.Then you can pair your Smart Auto Light to Home Zone Smart APP. 1. Tap “Add Device” 2. Tap CCT Smart Light. 3.
Page 9
Access the Features and Control your Smart Light 1. Home Page Power ON/OFF Auto CCT OFF Auto CCT ON Adjust color Based on ambient temperature temperature, change manually color temperature automatically. Adjust brightness manually 2. Auto Page Auto Page Motion Detection Full Light Duration Range Setting Setting...
Page 10
Intelligent Linkable, can 1. Luminance Detection: tap "+" to link your desired - Can set ambient brightness devices in this APP to active sensor 2. Slight Bright: - Can set the light brightness and duration 3. Schedule Page Tap "+" in the upper Adjust the timer, and Select the power switch right corner.
Cleaning and Maintenance 1. Clean periodically with soft cloth. 2. Do not use any cleaners with chemicals, solvents or harsh abrasives on this light. Do not use scouring pads, powders, steel wool or brasive paper. They could cause deterioration of the finish. This device complies with Part 15 of the FCC Rules.
Page 12
• Get exclusive deals delivered to you email. Get exclusive offers and deals when you subscribe! Thank you for choosing Home Zone Security! We are here to support you every step of the way. Please be sure to contact our customer support for troubleshooting and register your product for additional benefits.
Need help?
Do you have a question about the ES00931G and is the answer not in the manual?
Questions and answers