Lighting Instructions - Napoleon BIPRO 825-3 User Manual

Lighting Instructions

Smoker Burner
!
WARNING!
WARNING!
supply valve.
!
WARNING!
N415-0543CE-GB-DE JuNE 04.19
N415-0543CE-GB-DE.indd 9
Igniter
Left Rear
Tube Burner
Burner
Open lid
Ensure all burner controls are in the off position. Slowly turn on the gas
Main Burner
Lighting
1. Open grill lid.
2. Push and turn any main
burner knob to the high smoker burner control
position. If the pilot lights, knob to the high position.
continue to push down on the
control knob until the burner
lights and then release.
3. If the pilot does not ignite,
then immediately turn the electronic igniter button
control knob back to the 'off' until the burner lights, or
position and repeat step 2
several times.
4. If the pilot and burner will 4. If the burner will not
not ignite within 5 seconds, ignite within 5 seconds,
turn the control knob to turn the control knob to
the 'off' position and wait 5 the 'off' position and wait 5
minutes for any excess gas to minutes for any excess gas
dissipate. Either repeat steps to dissipate. Repeat step 2.
2 and 3 or light with a match.
5. If lighting the unit with a
match, clip the match into the
supplied lighting rod. Hold
the lit match down through
the grill and sear plate while
turning the corresponding
burner valve to high.
Do not use rear burner while operating main burner.
Right Right
Left
Smoker
Centre Centre Tube
Tray
Tube Burner
Tube
Burner
Burner
Smoker Burner Rear Burner Lighting
Lighting (if equipped)
1. Open grill lid. 1. Open grill lid.
2. Push and turn the 2. Remove warming rack.
3. Push and hold the 3. Push and turn the rear
burner control to the high
light with a match.
4. Push and hold the
electronic igniter button
until burner lights, or light by
5. If the burner will not
ignite within 5 seconds,
turn the control knob to
the 'off' position and wait 5
minutes for any excess gas to
dissipate. Repeat step 3.
Light
Left Right
Warming
Infra Infra
Burner
Red Red
Burner Burner
Off Position
Side Burner Lighting
(if equipped)
1. Open burner cover.
2. Push and turn the side
burner control knob to the high
position.
3. Push and hold the electronic
igniter button until the burner
position. lights, or light with a match.
4. If the burner will not ignite
within 5 seconds, turn the
control knob to the 'off'
match. position and wait 5 minutes
for any excess gas to dissipate.
Repeat step 2.
www.napoleon.com
9
EN
6/4/2019 2:11:07 PM