Page 1
PL16 C H A R G E R S • 9707 PL16 Charger 2-Position / V-Mount • 9707A PL16 Charger 2-Position / Gold-Mount • 9711 PL16+ Charger 4-Position / V-Mount • 9711A PL16+ Charger 4-Position / Gold Mount I N S T R U C T I O NS...
Page 2
Disclaimer The information contained in this document is correct at the time of publication. PAG Ltd. reserves the right to change specifications or product details without notification. Changes to product details will be incorporated in the next version of the document. PAG updates documents on a regular basis.
In these circumstances, seek advice from your nearest authorised PAG Service Centre, or direct from PAG UK, by telephoning +44 (0)20 8543 3131, or emailing support@paguk.com...
PAG L95e, L96e & L96T Batteries (Models 9310V & 9305V) Sony V-Mount Li-Ion Batteries • Sequential charging, individually: PAG L95 Model 9360, PAG L110 Model 9302V & PAG ZL-50 Model 9315V • Individual charging: PAG ZL-150 Model 9316V & PAG ZL-125 Model 9317V 9707A PL16 &...
Page 6
PAGlink Charging: Up to 8 PAGlink batteries can be charged on each position. Batteries can be in any state of charge. The most discharged batteries will be given priority. Fully charged batteries stop accepting charge automatically and independently. Batteries may be left on the charger when fully-charged and will be maintained in a ready-for-use condition.
Page 7
2.14 Overall Dimensions & Weight: 9707 PL16 V-Mount: H 75mm (3.0”) W 210mm (8.3”) D 190mm (7.5”) 1.4kg (3lbs). 9707A PL16 Gold Mount: H 75mm (3.0”) W 220mm (8.6”) D 190mm (7.5”) 1.4kg (3lbs). 9711 PL16+ V-Mount: H 75mm (3.0”) W 217mm (8.5”) D 315mm (12.4”) 1.6kg (3.5lbs).
SECTION 3 OPERATING INSTRUCTIONS PAGlink PL16 Chargers are fitted with an AC input socket conforming to CEE22 (IEC socket). AC supply connection to the charger should be made using only the standard lead supplied with this equipment. PAGlink PL16 Chargers have been designed for use on AC supplies worldwide, and automatically accept supplies in the range 100V to 265V.
Page 9
3.15 If the internal protection circuit of a PAG or Sony Li-Ion battery should turn- off, for any reason, the battery display will not operate, and there will be no voltage at the battery terminals.
Connection to the camera can be made using an XLR4 male to female adaptor lead (PAG Model 9450). The power supply is operated by pressing the button on the front panel of the charger, and holding it in for 1 second.
In the event of failure of a product covered by this guarantee, PAG Limited will repair and calibrate equipment returned to an authorised service facility within the period of the guarantee, provided the guarantor’s examination discloses to...
HARMONISED STANDARDS APPLIED: GENERIC: BS EN 6001-6-3:2007 +A1:2011 EN 61000-6-1 PRODUCT SPECIFIC: EN 55032 CLASS A BS EN 61000-4-2:2009 BS EN 60335-1:2012 +A13:2017 IEC 60335-1:2010 +AMD1:2013 +AMD2:2016 CSV Signed for and on behalf of PAG Ltd. Alan Lavender Chief Executive Date: 01.05.17.
Need help?
Do you have a question about the pagLink PL16 Series and is the answer not in the manual?
Questions and answers