Maintenance Of The Burner's Electrical Components Located Under The Control Box - Riello RS BLU Series Installation, Use And Maintenance Instructions

7.4.1 Maintenance of the burner's electrical
components located under the control box
In the event of adjustment or special maintenance operations on
the electrical components located under the control box, proceed
as follows:
 fully unscrew screw 1)(Fig. 41)
 loosen the three screws 2) and take out the control box as
indicated by the arrows.
View A
20085953
Maintenance
Screw 3) slides inside the slide bar until it reaches the correct po-
sition indicated in " View A ".
Fix screw 3) until it stops, carry out the adjustment
and maintenance in a secure way.
WARNING
 Once the maintenance is finished loosen screw 3), and
lower the control box, see " View B ";
 fix the three screws 2) and screw in screw 1) to fix the con-
trol box to the burner.
D11782
36 GB
View B
Fig. 41