DISTANCE MEASUREMENT
Aim directly at an object to measure its distance.
Proceed as follows:
1. Press the main/trigger button
activates.
• The reticule appears.
The reticule remains lit for another 6 seconds after
you release the main/trigger button. The reticule
remains lit continuously while the button is pressed
and held.
2. Aim at the object while the reticule is lit.
3. Press the main/trigger button again.
You can start another measurement by pressing
the main/trigger button at any time, as long as the
9 8
reticule display is lit.
- - -
– the distance to the object is less than 10
– the range is exceeded or
. The rangefinder
1
– the object is not sufficiently reflective.
When the display disappears, the rangefinder shuts
down automatically.
a. The reticule disappears briefly during the
measurement.
b. The measured value is displayed.
appears if
meters/yards or
EN
45