Revision History - Lantronix PremierWave EN Integration Manual

Revision History

Date
January 2011
February 2011
July 2011
August 2011
September 2011
October 2011
March 2012
July 2014
January 2015
August 2015
January 2016
PremierWave® Embedded System on Module Integration Guide
Rev. Comments
A Initial Draft
B Added a zoom top assembly diagram.
C Added mounting requirements and notes for the EN module clip.
D Updated connector and tolerance information, the mechanical
dimension diagrams and the evaluation board power supply circuitry
diagram.
E Added Power Supply information with a new diagram and specified
information about general purpose IO signals.
F Updated end product labeling information.
G Updated information on maximum input leakage current and module
initial power up sequence.
H Added content pertaining to the PremierWave SE1000 module and
updated images and input signal information.
I Updated compliance, USB host port and product label information.
J Updated reset signal information.
K Updated minimal signal voltage and drive strength information.
4