Advertisement
Section 1
Install Seatback Covers (cont.)
Step 1
Step 1
Tilt the seatback forward about halfway,
which will provide a space between the
seatback and seat bottom.
With the seatback tilted forward, tuck the
flap at the bottom of the Large seatback
cover between the seatback and the seat
bottom.
Repeat this for the Small seatback cover.
Move both seatbacks back to upright.
P4 - 29284 - Rev. C 1115
1
2
OR
3
Installation Instructions - Seat Cover, Rear Kit
Step 2
Step 2
1 Tuck the flaps between the headrest posts under-
neath the seat covers at the rear. Close and secure
the openings for the headrests with the mating hook-
&-loop strips. Make sure that the seatback release
latches are accessible on both seats.
2 Zip the seatback covers closed on both the Large
and Small seatback covers. Make sure that the seat
belt is not caught in the cover and operates smoothly.
3 Tuck the flaps coming between the seatbacks and
seat bottoms under the bottom of each seatback
cover. Snug the fit by pulling down on the seatback
cover while lifting up on the flaps and pushing the
hook-&-loop strips firmly together.
Page 4
© 2015 Bestop, Inc.
Advertisement
